LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2021 >> Model 3 Standard Plus >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electrical System (2 Of 2) -- Model 3 >> Pedestrian Warning Speaker >> Speaker - Pedestrian Warning - Remove and Replace >> Remove

Speaker - Pedestrian Warning - Remove and Replace: Remove

  1. Remove the RH front wheel. See WHEEL (REMOVE AND INSTALL) .
  2. Remove the clips (x9) that hold the RH front wheel liner to fascia, and move the wheel liner aside for access.
    G00649340Courtesy of TESLA, INC.
  3. Remove the clip that attaches the harness to the pedestrian warning speaker assembly.
    G00649341Courtesy of TESLA, INC.
  4. Release the locking tab by sliding it away from the connector, then depress the grey locking tab to release the pedestrian warning speaker connector.
    G00649342Courtesy of TESLA, INC.
  5. Remove the screws (x3) that attach the pedestrian warning speaker assembly to the front fascia, and then remove the pedestrian warning speaker from the fascia.

    1.8 N.m (1.3 ft-lbs) 

    Tip: Use of the following tool(s) is recommended:

    • Flex head ratchet/flex head torque wrench
    • 2 in extension
    • Torx T25 socket
    • Ratchet/torque wrench

    G14744477Courtesy of TESLA, INC.
    G14744478Courtesy of TESLA, INC.
scientia non olet · About LEMON Manuals