LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2021 >> Model 3 Standard Plus >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electrical System (2 Of 2) -- Model 3 >> Exterior Lights >> Light - Brake - Center High Mounted - Remove and Replace >> Install

Light - Brake - Center High Mounted - Remove and Replace: Install

  1. Install the center high mounted brake light on the package shelf and secure it with clips.
    G14744276Courtesy of TESLA, INC.
  2. Install the screws that attach the center high mounted brake light to the package tray.

    0.5 N.m (4 in-lbs) 

    G14744277Courtesy of TESLA, INC.
  3. Connect the center high mounted brake light electrical connector.
    G14744278Courtesy of TESLA, INC.
  4. Install the package tray trim. See TRIM - PACKAGE TRAY (REMOVE AND REPLACE) .
  5. Install the RH upper C-pillar trim. See TRIM - C-PILLAR - UPPER - LH (REMOVE AND REPLACE) .
  6. Install the RH side rail trim. See TRIM - SIDE RAIL - LH (REMOVE AND INSTALL) .
  7. Install the RH 2nd row seat side bolster. See BOLSTER - SIDE - SEAT - 2ND ROW - LH (REMOVE AND REPLACE) .
  8. Install the LH upper C-pillar trim. See TRIM - C-PILLAR - UPPER - LH (REMOVE AND REPLACE) .
  9. Install the LH side rail trim. See TRIM - SIDE RAIL - LH (REMOVE AND INSTALL) .
  10. Install the LH 2nd row seat side bolster. See BOLSTER - SIDE - SEAT - 2ND ROW - LH (REMOVE AND REPLACE) .
scientia non olet · About LEMON Manuals