LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2021 >> Model 3 Performance >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Electrical System (2 Of 2) -- Model 3 >> Wipers and Washers >> Cap - Reservoir - Windshield Washer - Remove and Replace >> Remove

Cap - Reservoir - Windshield Washer - Remove and Replace: Remove

  1. Remove the rear underhood apron. See UNDERHOOD APRON - REAR (REMOVE AND REPLACE)
  2. Use a plastic trim tool to remove the cap from the windshield washer reservoir filler neck.
    NOTE: The cap and the retaining collar are a single piece.
    G14744456Courtesy of TESLA, INC.
scientia non olet · About LEMON Manuals