- Use a towel and/or compressed air to clean the area surrounding the spoiler.
WARNING:
To avoid personal injury, eye protection must be worn while using compressed air.
- Assemble the badge removal kit by cutting an approximately 24 inch section of fishing line and connecting each end of the fishing line to a handle using a knot.
- Starting from one end of the spoiler, carefully use the badge removal kit to release the spoiler from the trunk.
CAUTION:
Care must be taken to avoid damage to paintwork and exterior trim.
 Courtesy of TESLA, INC.
|
- Use a vacuum to remove any debris or dirt from the trunk.
- Using a rubber wheel, remove any remaining adhesive from the trunk.
WARNING:
To avoid personal injury, eye and ear protection must be worn while performing this step.