Closeout Panel - Door - Front - LH - Remove And Install: Remove

Remove the LH front door trim panel. See Panel - Door Trim - Front - LH (Remove and Install) .
Remove the LH front door inner belt seal from the door. See SEAL - INNER BELT - FRONT DOOR - LH (REMOVE AND REPLACE) .
Remove the LH front door glass. See GLASS - DOOR - LH - FRONT (REMOVE AND REPLACE) .
Release the connector lock, and then disconnect the electrical wiring harness from the LH front door window motor connector.

Courtesy of TESLA, INC.
Disconnect the electrical wiring harness from the LH front door speaker.

Courtesy of TESLA, INC.
Release the connector lock, and then disconnect the electrical wiring harness from the LH front door pressure sensor connector.

Courtesy of TESLA, INC.
Disconnect the electrical wiring harness from the LH door mirror connector.

Courtesy of TESLA, INC.
Release the clips that attach the electrical wiring harness to the closeout panel.

Courtesy of TESLA, INC.
Remove the bolts that attach the closeout panel to the door.
4.5 N.m (3.3 lbs-ft)

Tip: Use of the following tool(s) is recommended:
- 8 mm socket
- 2 in extension
Courtesy of TESLA, INC.
Remove the plugs that cover the regulator rail fasteners.

Courtesy of TESLA, INC.
Remove the bolts that attach the regulator rail fasteners to the vehicle, and the remove the closeout panel from the vehicle.
8 N.m (5.9 lbs-ft)

NOTE: Slide the closeout panel down and out.

NOTE: The window regulator and closeout panel are removed attached.

Tip: Use of the following tool(s) is recommended:
- 10 mm socket
- Flex head ratchet/flex head torque wrench
- 6 in extension
Courtesy of TESLA, INC.

Courtesy of TESLA, INC.