Upper Leg Support - Bumper Carrier - Front - Remove and Replace: Install

Install the front bumper carrier upper leg support to the front end carrier.
Tip: Engage the mounting tabs (x2) properly when installing.

Courtesy of TESLA, INC.
Install the bolts (x4) that attach the upper leg support to the front end carrier.
8 N.m (5.9 lbs-ft)
- 10 mm deep socket
- 6 in extension
- Flex head ratchet/flex head torque wrench
Courtesy of TESLA, INC.
Install the front fascia. See Fascia - Front (Remove and Install) .