LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2020 >> Model Y Performance >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Doors, Windows And Latches -- Model Y >> Latches Strikers And Pinch Sensors >> Switch - Closure - Liftgate - Remove And Replace >> Install

Switch - Closure - Liftgate - Remove And Replace: Install

  1. Place the liftgate switch in place and make sure that it is oriented correctly.
  2. Install the screws that attach the liftgate switch to the liftgate.

    0.5 N.m (4 lbs-in) 

    NOTE: Use of the following tool(s) is recommended:
    • Torx T20 socket
    G14821003Courtesy of TESLA, INC.
  3. Connect the electrical connector to the liftgate switch.
    G14821004Courtesy of TESLA, INC.
  4. Install the liftgate lower trim. See Trim - Liftgate - Lower (Remove and Replace) .
  5. Install the liftgate upper trim. See Trim - Upper - Liftgate (Remove and Replace) .
  6. Close the liftgate.
scientia non olet · About LEMON Manuals