Armrest - 2nd Row - 7-Seat | Remove And Replace: Install
- Install the 2nd row armrest onto the center 2nd row seatback.
- Fold down the center 2nd row seatback assembly.
- Install the LH and RH armrest lobe bolts.
Torque 8 N.m
Tip: Use of the following tool(s) is recommended:
- 10 mm socket
- Flex head ratchet/flex head torque wrench
LH shown; RH similar
- Install the LH armrest cover panel onto the 2nd row seat frame, and then install the bolts that attaches the panel to the seat frame. Repeat this step for the RH armrest cover panel.
Torque 2.5 N.m
Tip: Use of the following tool(s) is recommended:
- Torx T20 socket
- Flex head ratchet/flex head torque wrench
- Engage the hooks that attach the top of the center 2nd row seatback panel to the seat frame, and then engage the clips (x5) that attach the lower portion of the backpanel to the seat frame.
- Install the center 2nd row backrest switch. See BACKREST SWITCH - SEAT BACK - 2ND ROW - CENTER (REMOVE AND REPLACE) .
- Release the center 2nd row seatback latch.
- Install the center 2nd row seatback headrest.
- Raise the center 2nd row seatback to the upright position.
- Move the front seats to their original positions.
- Raise all the windows and close all the doors.