LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2020 >> Model Y Performance >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Electrical System -- Model Y (2 Of 2) >> Wipers And Washers >> Filler Neck - Reservoir - Windshield Washer (LHD) - Remove And Replace >> Remove

Filler Neck - Reservoir - Windshield Washer (LHD) - Remove And Replace: Remove

  1. Remove the rear underhood apron. See UNDERHOOD APRON - REAR (REMOVE AND REPLACE) .
  2. Use a clip prytool to release the push clip that attaches the windshield washer reservoir filler neck.
    G14834127Courtesy of TESLA, INC.
  3. Release the washer hose from the retaining tabs (x3).
    G14834128Courtesy of TESLA, INC.
  4. Pull the filler neck directly away from the windshield washer reservoir to remove it.
    NOTE: The filler neck is equipped with an O-ring.
    G14834129Courtesy of TESLA, INC.
scientia non olet · About LEMON Manuals