- Remove the driver's seat assembly. See Seat Assembly - 1st Row - LH (Remove and Install) .
- Protect the front and side seat trims with fender cover or protective tape.
- Release the j-hooks that attach the rear toe kick to the underside of the driver's seat assembly.
Courtesy of TESLA, INC.
|
- Lift the rear lower panel, and then remove the screw that attaches the outer seat trim to the driver's seat assembly.
Courtesy of TESLA, INC.
|
- Release the clips that attach the outer seat trim to the driver's seat assembly, and then separate the trim from the seat.
CAUTION:
Take care when releasing the front clips, as they can damage the outer seat trim.
Courtesy of TESLA, INC.
|
- Disconnect the seat switch connector from the outer seat trim, and then remove the outer seat trim.
Courtesy of TESLA, INC.
|
- Lift the rear lower panel, and then remove the screw that attaches the inner seat trim to the driver's seat assembly.
Courtesy of TESLA, INC.
|
- Release the clips that attach the inner seat trim to the driver's seat assembly, and then separate the trim from the seat.
CAUTION:
Take care when releasing the front clips, as they can damage the inner seat trim.
Courtesy of TESLA, INC.
|
- Release the clip that attaches the electrical harness to the inner seat trim, and then remove the inner seat trim.
Courtesy of TESLA, INC.
|
- Release the clips that attach the front seat trim to the driver's seat assembly, and then remove the trim from the seat.
Courtesy of TESLA, INC.
|
- Release the clip that attaches the LH side of the seat cushion trim to the seat assembly.
Courtesy of TESLA, INC.
|
- Release the clips that attach the RH side of the seat cushion trim to the seat assembly.
Courtesy of TESLA, INC.
|
- Release the j-hooks that attach the rear portion of the seat cushion trim to the seat assembly.
Courtesy of TESLA, INC.
|
- Disconnect the seat cushion connectors.
Courtesy of TESLA, INC.
|
- Release the perimeter j-hook that attaches the seat cushion trim to the driver's seat j-hook channel, and then lift the seat cushion trim over the seat cushion foam.
NOTE:
Start from the rear corner of the seat cushion trim, and then work around the perimeter.
Courtesy of TESLA, INC.
|
Courtesy of TESLA, INC.
|
- Remove the seat cushion foam and trim from the seat assembly.
Courtesy of TESLA, INC.
|