LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2020 >> Model X Performance >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Illumination Lights >> Electrical System -- Model X >> Exterior Lights >> Lamp - Brake - High Mounted - Remove And Replace >> Removal

Lamp - Brake - High Mounted - Remove And Replace: Removal

  1. Remove the spoiler applique Applique - Spoiler (Remove And Replace) .
  2. Remove the RH side liftgate trim Trim - Liftgate - Side - LH (Remove And Replace) .
  3. Remove the RH catch basin cover.
  4. On the RH side of the liftgate, disconnect the high mounted brake lamp electrical connector.
    G15203268Courtesy of TESLA, INC.
  5. Close the liftgate.
  6. On the RH side of the spoiler, pull the harness for the high mounted brake lamp through the hole in the spoiler stanchion.
    G15203269Courtesy of TESLA, INC.
  7. Release the high mounted brake lamp harness from the channel on the top of the spoiler.
  8. Remove the bolts (x8) that secure the high mounted brake lamp to the spoiler (torque 1.5 N.m).
    G15203270Courtesy of TESLA, INC.
  9. Release the double sided tape that secures the high mounted brake lamp to the spoiler.
  10. Remove the high mounted brake lamp from the spoiler.
scientia non olet · About LEMON Manuals