Antenna Amplifier - AM/FM And RKE - Remove And Replace: Removal
- Remove the LH liftgate side trim Trim - Liftgate - Side - LH (Remove And Replace)
.
- Remove the screw that secures the antenna amplifier to the liftgate (torque 8 N.m).
Courtesy of TESLA, INC.
|
- Disconnect both electrical connectors from the antenna amplifier.
Courtesy of TESLA, INC.
|
- Release the clip that secures the antenna amplifier to the liftgate.
- Carefully release the antenna amplifier lead from the glass connectors (x2).
Courtesy of TESLA, INC.
|
- Release the adhesive strip that secures the antenna amplifier to the liftgate glazing.
- Remove the antenna amplifier from the vehicle.