Switches - Steering Wheel - Remove And Replace: Removal
- Remove the driver's air bag Air Bag - Driver's (Remove And Replace) .
- Place the driver's air bag assembly on a soft clean surface with the backside of the bezel facing up.
- Unplug the harness connectors (x2) from the back of 1 of the switches.
- Remove the fasteners (x2) that secure the switch to the air bag assembly (torque 1.2 N.m).
- Disengage the switch retaining clips by carefully pushing the switch up through the back of the bezel.CAUTION: Take care not to damage component(s).
- Remove the switch from the bezel.
- Repeat steps 3 through 6 on the other steering wheel switch.