Horn - Tone - Pair - Remove and Replace: Removal
- Open the LH front door.
- Raise and support the vehicle. See RAISE VEHICLE - 2 POST LIFT .
- Remove the front fascia assembly. See FASCIA ASSEMBLY - FRONT (REMOVE AND INSTALL) .
- Release the push connectors (x2), and then remove the bolt that secures the low tone horn to remove the low tone horn from the vehicle.
9 Nm (6.6 lbs-ft)
Use of the following tool(s) is recommended:
- Ratchet/torque wrench
- 10 mm socket
- Release the push connectors (x2), and then remove the bolt that secures the high tone horn to remove the high tone horn from the vehicle.
9 Nm (6.6 lbs-ft)
Use of the following tool(s) is recommended:
- Ratchet/torque wrench
- 10 mm socket