LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2020 >> Model 3 Performance >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electrical System (2 Of 2) -- Model 3 >> Parking Sensors >> Sensor - Parking Distance - Inner - Front - Remove and Replace >> Remove

Sensor - Parking Distance - Inner - Front - Remove and Replace: Remove

  1. Remove the rear underhood apron. See UNDERHOOD APRON - REAR (REMOVE AND REPLACE) .
  2. Remove the cabin intake duct. See DUCT - CABIN INTAKE (REMOVE AND REPLACE) .
  3. Remove the underhood storage unit. See UNDERHOOD STORAGE UNIT (REMOVE AND REPLACE) .
  4. Release the tabs (x2) that attach the front parking distance sensor to the front fascia, and then remove the sensor from the fascia.
    G14744130Courtesy of TESLA, INC.
    G14744131Courtesy of TESLA, INC.
scientia non olet · About LEMON Manuals