LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2020 >> Model 3 Performance >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Electrical System (2 Of 2) -- Model 3 >> Exterior Lights >> Light - Brake - Center High Mounted - Remove and Replace >> Remove

Light - Brake - Center High Mounted - Remove and Replace: Remove

  1. Remove the LH 2nd row seat side bolster. See BOLSTER - SIDE - SEAT - 2ND ROW - LH (REMOVE AND REPLACE) .
  2. Remove the LH side rail trim. See TRIM - SIDE RAIL - LH (REMOVE AND INSTALL) .
  3. Remove the LH upper C-pillar trim. See TRIM - C-PILLAR - UPPER - LH (REMOVE AND REPLACE) .
  4. Remove the RH 2nd row seat side bolster. See BOLSTER - SIDE - SEAT - 2ND ROW - LH (REMOVE AND REPLACE) .
  5. Remove the RH side rail trim. See TRIM - SIDE RAIL - LH (REMOVE AND INSTALL) .
  6. Remove the RH upper C-pillar trim. See TRIM - C-PILLAR - UPPER - LH (REMOVE AND REPLACE) .
  7. Remove the package tray trim. See TRIM - PACKAGE TRAY (REMOVE AND REPLACE) .
  8. Disconnect the center high mounted brake light electrical connector.
    G14744272Courtesy of TESLA, INC.
  9. Remove the screws that attach the center high mounted brake light to the package tray.
    G14744273Courtesy of TESLA, INC.
  10. Release the clips that attach the center high mounted brake light to the package tray, and then remove the brake light from the vehicle.
    G14744274Courtesy of TESLA, INC.
    G14744275Courtesy of TESLA, INC.
scientia non olet · About LEMON Manuals