Taillight Assembly - RH - Remove And Replace: Removal
- Remove the subwoofer. See Subwoofer Assembly (Remove And Replace)
.
- Disconnect the electrical harness from the taillight connector.
Courtesy of TESLA, INC.
|
- Remove the nuts (x2) that attach the taillight to the rear of the body.
Courtesy of TESLA, INC.
|
- Pull back the NVH padding and remove the nut and bolt that attach the taillight to the side of the body.
Courtesy of TESLA, INC.
|
- Remove the taillight assembly from the vehicle, and place it on a soft, clean surface.
- Remove the screws (x3) that secure the dummy charge port door to the taillight, and then remove the dummy charge port door from the taillight.
Courtesy of TESLA, INC.
|