Retainer - Sill - Rear - LH - Remove And Replace: Removal
- Remove the HV Battery HV Battery (AWD) (Remove And Install) .
- Remove the rear LH wheel arch liner Wheel Arch Liner - Rear - LH (Remove And Replace) .
- Drill out the rivets (x3) that secure the sill retainer to the frame rail.WARNING: Wear protective eyewear and hearing protection when drilling.
- Working from the rear wheel well, slide the sill retainer out from the frame rail.
Tip: Use a screwdriver to push up on the sill retainer from the bolt holes if the sill retainer is snagged on the frame rail.
- Discard the barrel nuts.