LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2019 >> Model X Performance >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel -- Model X >> Instrument Panel >> Cross Car Beam - Remove And Replace >> Installation

Cross Car Beam - Remove And Replace: Installation

Installation procedure is the reverse of removal, except for the following:

  1. Record the routing of the instrument panel harness and the positions of the edge clips on the old cross car beam.
  2. Transfer the instrument panel harness to the new cross car beam. Ensure that all edge clips are in the original locations.
scientia non olet · About LEMON Manuals