LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2019 >> Model S Performance >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Horns >> Electrical System -- Model S >> Exterior Lights >> Ballast - HID - LH (SAE) - Remove And Replace >> Removal

Ballast - HID - LH (SAE) - Remove And Replace: Removal

  1. Remove the LH front wheel arch liner louver. See Louver - Wheel Arch Liner - Front - LH (Remove and Replace) .
  2. Peel back the front of the LH wheel arch liner to gain access to the headlight assembly.
    G15035004Courtesy of TESLA, INC.
  3. Remove the screws (x3) that attach the HID ballast to the headlight assembly.
    G15035005Courtesy of TESLA, INC.
  4. Disconnect the electrical connectors (x2) from the HID ballast.
    NOTE: If corrosion on the connectors is observed, the headlight may need replacement; refer to Toolbox article 54602.
    G15035006Courtesy of TESLA, INC.
scientia non olet · About LEMON Manuals