Glove Box - Remove And Replace: Removal
- Remove the RH lower instrument panel, refer to ASSEMBLY - INSTRUMENT PANEL LOWER - RH (REMOVE AND REPLACE)
- Remove the lower glove box panel by releasing the trim clips (x6).
- Open the glove box.
- Remove the 6 screws that secure the glove box (torque 2.3 N.m).
- Release the glove box assembly.CAUTION: Do not damage the 3 harness connections that are attached to back of the glove box.
- Disconnect the 3 harness connections from the back of the glove box.
- Remove the glove box.