LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2019 >> Model 3 Performance >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Electrical System (2 Of 2) -- Model 3 >> Pedestrian Warning Speaker >> Speaker - Pedestrian Warning - Remove and Replace >> Install

Speaker - Pedestrian Warning - Remove and Replace: Install

  1. Install the screws (x3) that attach the pedestrian warning speaker assembly to the front fascia.

    1.8 N.m (1.3 ft-lbs) 

    Tip: Use of the following tool(s) is recommended:

    • 2 in extension
    • Torx T25 socket
    • Ratchet/torque wrench

    G14744477Courtesy of TESLA, INC.
  2. Engage the locking tab to connect the pedestrian warning speaker connector.
    G00649342Courtesy of TESLA, INC.
  3. Install the clip that attaches the harness to the pedestrian warning speaker assembly.
    G00649341Courtesy of TESLA, INC.
  4. Install the clips (x9) that hold the RH front wheel liner to fascia.
    G00649340Courtesy of TESLA, INC.
  5. Install the RH front wheel. See WHEEL (REMOVE AND INSTALL) .
scientia non olet · About LEMON Manuals