LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2019 >> Model 3 Performance >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats -- Model 3 >> 2nd Row Seat Assemblies and Hardware >> Seat Back - 2nd Row - LH - Remove and Replace >> Remove

Seat Back - 2nd Row - LH - Remove and Replace: Remove

  1. Remove the 2nd row lower seat cushion. See SEAT CUSHION - LOWER - 2ND ROW (REMOVE AND REPLACE) .
  2. Remove the LH 2nd row seat side bolster. See BOLSTER - SIDE - SEAT - 2ND ROW - LH (REMOVE AND REPLACE) .
  3. Release the clips that attach the bolster bracket, and remove the bracket from the vehicle.
    G14740256Courtesy of TESLA, INC.
  4. Remove the LH 2nd row buckle. See BUCKLE - 2ND ROW - LH (REMOVE AND REPLACE) .
  5. Disconnect the electrical harness from the heated seat connector for the LH 2nd row seat back assembly, if equipped.
    G14740257Courtesy of TESLA, INC.
  6. Remove the nuts that attach the LH seat back assembly hinge bracket to the body.

    18 N.m (13.3 ft-lbs) 

    G14740258Courtesy of TESLA, INC.
  7. Lift the left side of the LH seat back assembly up, move forward and to the left, and pull the inner pivot out of the RH seat back assembly.
  8. Remove the LH seat back assembly from the vehicle.
    G14740259Courtesy of TESLA, INC.
scientia non olet · About LEMON Manuals