Windshield (Vehicles with 2nd Generation or Later Autopilot) - Remove and Replace: Notes

Last modified: 15/08/2023 10:11:17

Courtesy of TESLA, INC.

NOTE: See Personal Protection to make sure to wear proper PPE when performing below procedure.

NOTE: This procedure is for windshield assemblies that have new temperature and humidity sensors preinstalled. For instructions on installing a windshield that does not have a temperature and humidity sensor preinstalled, see WINDSHIELD (REUSE HUMIDITY AND TEMPERATURE SENSOR) (REMOVE AND REPLACE) .

multimedia:A supplement to the article is available.

WARNING:

The video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.

CAUTION:

For Europe only: Only technicians who have been trained in working with diisocyanates and have completed all required certification courses are permitted to perform procedures using urethane and other products containing diisocyanates. Proper personal protective equipment (PPE) must be worn when working with products containing diisocyanates.