Speaker - Pedestrian Warning - Remove and Replace: Install
- Install the screws (x3) that attach the pedestrian warning speaker assembly to the front fascia.
1.8 N.m (1.3 ft-lbs)
Tip: Use of the following tool(s) is recommended:
- 2 in extension
- Torx T25 socket
- Ratchet/torque wrench
- Engage the locking tab to connect the pedestrian warning speaker connector.
- Install the clip that attaches the harness to the pedestrian warning speaker assembly.
- Install the clips (x9) that hold the RH front wheel liner to fascia.
- Install the RH front wheel. See WHEEL (REMOVE AND INSTALL) .