LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2018 >> Model 3 Performance >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Instrument Panel -- Model 3 >> Instrument Panel >> NVH Pad - Glove Box - Remove and Replace >> Install

NVH Pad - Glove Box - Remove and Replace: Install

  1. Install a new NVH pad onto the glove box assembly.
    G14740727Courtesy of TESLA, INC.
  2. Install the glove box. See GLOVE BOX - WITHOUT KNEE AIRBAGS (REMOVE AND REPLACE) .
  3. Install the LH lower A-Pillar trim. See TRIM - A-PILLAR - LOWER - LH (REMOVE AND REPLACE) .
  4. Install the LH middle A-Pillar trim. See TRIM - A-PILLAR - MIDDLE - LH (REMOVE AND REPLACE) .
  5. Install the main instrument panel decor trim. See DECOR TRIM - INSTRUMENT PANEL - MAIN (REMOVE AND REPLACE) .
  6. Install the LH and RH air wave bezel caps. See END CAP - AIR WAVE - LH (REMOVE AND REPLACE) .
  7. Install the LH and RH instrument panel end caps. See END CAP - INSTRUMENT PANEL - LH (REMOVE AND REPLACE) .
  8. Close the front doors.
scientia non olet · About LEMON Manuals