LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2018 >> Model 3 Performance >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Body -- Model 3 >> Bumper/Fascia >> Cover - Tow Hook - Front - Remove and Install >> Install

Cover - Tow Hook - Front - Remove and Install: Install

  1. Insert location tab between the 1 and 2 o'clock position and rotate the bottom snap fit tabs into the slots in the fascia. Once the tabs are located, push on the outer edge to snap the cover on.
scientia non olet · About LEMON Manuals