LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2018 >> Model 3 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats -- Model 3 >> 2nd Row Seat Covers Pads and Trims >> Cup Holder - 2nd Row - Remove and Replace >> Install

Cup Holder - 2nd Row - Remove and Replace: Install

  1. Install a new cup holder into the armrest.
    NOTE: Press firmly on the edges of the cup holder to engage the locking tabs.
    G14740550Courtesy of TESLA, INC.
  2. Return the armrest to the upright position.
    G14740551Courtesy of TESLA, INC.
  3. Close the RH rear door.
scientia non olet · About LEMON Manuals