LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2018 >> Model 3 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Accessories Control Systems >> Electrical System (2 Of 2) -- Model 3 >> Wipers and Washers >> O-ring - Filler Neck - Reservoir - Windshield Washer (RHD) - Remove and Replace >> Remove

O-ring - Filler Neck - Reservoir - Windshield Washer (RHD) - Remove and Replace: Remove

  1. Remove the windshield washer reservoir filler neck. See FILLER NECK - RESERVOIR - WINDSHIELD WASHER (RHD) (REMOVE AND REPLACE) .
  2. Use a flathead screwdriver to remove the O-ring from the filler neck.
    G14744454Courtesy of TESLA, INC.
scientia non olet · About LEMON Manuals