LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2017 >> Model 3 Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Exterior Fittings -- Model 3 >> License Plate Mountings >> Bracket - License Plate - Rear (EMEA) - Remove and Replace >> Remove

Bracket - License Plate - Rear (EMEA) - Remove and Replace: Remove

  1. Remove the screws (x4) that attach the rear license plate to the rear license plate bracket, if a license plate is installed. Otherwise, skip to the next step.
  2. Remove the screws (x2) that attach the rear license plate bracket to the vehicle, and then remove the bracket from the vehicle.
    G14739837Courtesy of TESLA, INC.
scientia non olet · About LEMON Manuals