LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2017 >> Model 3 Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Doors, Windows And Latches -- Model 3 >> Latches Strikers and Pinch Sensors >> Striker - Trunk - Remove and Replace >> Remove

Striker - Trunk - Remove and Replace: Remove

  1. Remove the rear trunk sill trim. See TRIM - SILL - TRUNK (REMOVE AND REPLACE) .
  2. Use masking tape to mark the location of the trunk striker.
  3. Remove the bolts that attach the trunk striker to the body, and then remove the striker from the vehicle.
    G14739547Courtesy of TESLA, INC.
    G14739548Courtesy of TESLA, INC.
scientia non olet · About LEMON Manuals