LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2017 >> Model 3 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats -- Model 3 >> Front Seat Covers Pads and Trims >> Diamond Cover - Seat Side - 1st Row - RH - Remove and Replace >> Install

Diamond Cover - Seat Side - 1st Row - RH - Remove and Replace: Install

  1. Install the diamond cover.
  2. Install the LH front seat buckle connector.
  3. Install the diamond cover clips (x4) from the LH front seat.
  4. Connect LH front seat buckle connector.
  5. Connect 12V power. See 12V/LV POWER (DISCONNECT AND CONNECT) .
  6. Install the drive seat inboard side shield. See SIDE SHIELD - INBOARD - DRIVER SEAT (REMOVE AND REPLACE) .
scientia non olet · About LEMON Manuals