LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2017 >> Model 3 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats -- Model 3 >> 2nd Row Seat Assemblies and Hardware >> Seat Cushion - Lower - 2nd Row - Remove and Replace >> Install

Seat Cushion - Lower - 2nd Row - Remove and Replace: Install

  1. Position the seat cushion in the vehicle.
  2. Connect the electrical connectors on each side of the seat cushion.
  3. Insert the seat belt buckles through the seat cushion holes.
  4. Slide the seat cushion inward, align the front guide tabs to the locking tabs, and then push the seat cushion into the tabs.
  5. Make sure that the seat cushion is fully seated with a push and pull test near the tabs.
  6. Move the driver seat and the front passenger seat to their original position.
scientia non olet · About LEMON Manuals