LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2017 >> Model 3 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats -- Model 3 >> 2nd Row Seat Assemblies and Hardware >> Cap - 12V - Penthouse - Remove and Replace >> Remove

Cap - 12V - Penthouse - Remove and Replace: Remove

  1. Remove the 2nd row lower seat cushion. See SEAT CUSHION - LOWER - 2ND ROW (REMOVE AND REPLACE) .
  2. Lift the 12V cap straight up from over the high voltage controller connector on the RH side of the penthouse, and then remove the 12V cap from the vehicle.
    G14740216Courtesy of TESLA, INC.
scientia non olet · About LEMON Manuals