LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2017 >> Model 3 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Interior Trim (Model 3) >> Pillar and Sill Trim >> Trim - B-Pillar - Upper - LH - Remove and Replace >> Install

Trim - B-Pillar - Upper - LH - Remove and Replace: Install

  1. If reusing the same LH upper B-pillar trim, install new clips onto the trim.
  2. Make sure that the seatbelt shoulder adjustment mechanism and the slider trim on the upper B-pillar trim are at their lowest position.
  3. Move the seatbelt retainer through the LH upper B-pillar trim, and then attach it to the seat.
  4. Insert the top portion of the upper B-pillar trim under the headliner.
  5. Press the bottom of the LH upper B-pillar trim into the LH lower B-pillar trim, and then apply side pressure to fasten the clips.
  6. Press the top of the LH upper B-pillar trim into the top of the B-pillar, and then apply side pressure to fasten the clips.
  7. Reposition the body seals so that they overlap the LH upper B-pillar trim.
  8. Move the LH front seat to its original position.
  9. Close both LH doors.
scientia non olet · About LEMON Manuals