LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2017 >> Model 3 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Interior Trim (Model 3) >> Pillar and Sill Trim >> Trim - A-Pillar - Middle - LH - Remove and Replace >> Install

Trim - A-Pillar - Middle - LH - Remove and Replace: Install

  1. If reusing the same LH middle A-pillar trim, install a new clip onto the trim.
  2. Align the bottom tab, and then push the top clip to fully seat the LH middle A-pillar trim.
    NOTE: Make sure that the door seal is on top of the trim.
  3. Install the LH instrument panel end cap. See END CAP - INSTRUMENT PANEL - LH (REMOVE AND REPLACE) .