LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2017 >> Model 3 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Instrument Panel -- Model 3 >> Instrument Panel >> Glove Box (With Knee Airbags (Non-Heat Pump)) - Remove and Replace >> Torque Specifications

Torque Specifications

TORQUE SPECIFICATIONS: GLOVE BOX - WITH KNEE AIRBAGS (REMOVE AND REPLACE)

Description Torque Value Recommended Tools Reuse/Replace Notes
Screws (x6) that attach the glove box to the IP carrier 2.3 N.m (1.7 ft-lbs) 
  • Torx T20 socket
  • 1/4 in std ratchet
  • 1/4 in torque wrench (installation only)
  • 4 in extension
Reuse