LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2017 >> Model 3 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Instrument Panel -- Model 3 >> Instrument Panel >> Cover - Airbag - Knee - Front Passenger - Remove and Replace >> Remove

Cover - Airbag - Knee - Front Passenger - Remove and Replace: Remove

  1. Disconnect 12V power. See 12V/LV POWER (DISCONNECT AND CONNECT) .
  2. Remove the passenger footwell cover. See COVER - FOOTWELL - PASSENGER (LHD) (REMOVE AND REPLACE) .
  3. Remove the T20 bolts (x2) that attach the front passenger knee airbag cover to the vehicle.
    G14740631Courtesy of TESLA, INC.
  4. Remove and discard the T30 patchbolts (x4) that attach the front passenger knee airbag cover to the vehicle.
    CAUTION: Support the front passenger knee airbag cover while releasing the fasteners, as the airbag is still connected to an electrical connector.
    G14740632Courtesy of TESLA, INC.
  5. Release the clip that attaches the front passenger knee airbag cover to the vehicle.
    G14740633Courtesy of TESLA, INC.
  6. Partially release the front passenger knee airbag cover from the vehicle.
    CAUTION: Carefully release the corner clip, as it can be easily damaged.
    NOTE: Take Care When Releasing Highlighted Clip.
    G14740634Courtesy of TESLA, INC.
  7. Disconnect the electrical connector from the front passenger knee airbag, and then remove the airbag cover from the vehicle.
    G14740635Courtesy of TESLA, INC.
  8. Release the metal tabs (x11) that attach the front passenger knee airbag to the airbag cover, and then remove the cover.
    G14740636Courtesy of TESLA, INC.
    G14740637Courtesy of TESLA, INC.
scientia non olet · About LEMON Manuals