LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2017 >> Model 3 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Exterior Fittings -- Model 3 >> License Plate Mountings >> Bracket - License Plate - Rear (EMEA) - Remove and Replace >> Notes

Bracket - License Plate - Rear (EMEA) - Remove and Replace: Notes

Last modified: 11/03/2019 09:48:43

Fig 1: Rear License Plate Bracket (EMEA) Component Location
G14739836Courtesy of TESLA, INC.
NOTE: See Personal Protection to make sure to wear proper PPE when performing below procedure.