LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2017 >> Model 3 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Body -- Model 3 >> Bumper/Fascia >> Foam - Bumper Beam - Front - Remove and Replace >> Remove

Foam - Bumper Beam - Front - Remove and Replace: Remove

  1. Remove the front fascia. See FASCIA - FRONT (REMOVE AND INSTALL) .
  2. Remove the front bumper beam foam from the front bumper beam.
    NOTE: If the vehicle is equipped with pedestrian protection systems, disconnect and remove the pressure tube sensors from the front bumper beam foam.
    G14738864Courtesy of TESLA, INC.
scientia non olet · About LEMON Manuals