LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2012 >> Model S >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats -- Model S >> Front Seat Covers, Pads, And Trims >> Foam - Cushion - Driver's Seat - Remove And Replace >> Removal

Foam - Cushion - Driver's Seat - Remove And Replace: Removal

NOTE: This component cannot be serviced individually. To service this component, perform the following:
  1. Replace the driver's seat trim and foam assembly, refer to FOAM AND TRIM ASSEMBLY - DRIVER'S SEAT (1ST GENERATION) (REMOVE AND INSTALL) .