LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2012 >> Model S >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats -- Model S >> 2nd Row Seat Assemblies And Hardware >> Striker - Seat Back - 2nd Row Seat - LH - Remove And Replace >> Installation

Striker - Seat Back - 2nd Row Seat - LH - Remove And Replace: Installation

  1. Install the new striker and tighten the outboard screw. Only partially tighten the inboard screw.
  2. Compare the striker to the seat back and adjust striker height.
  3. Tighten both screws to full torque (torque 17 N.m). Confirm fit against seat back.
  4. Reinstall rear sill trim panel.
  5. Reinstall rear trunk side trim.
scientia non olet · About LEMON Manuals