LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2012 >> Model S >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats -- Model S >> 2nd Row Seat Assemblies And Hardware >> Seat Cushion - Lower - 2nd Row - Executive - LH - Remove And Replace >> Installation

Seat Cushion - Lower - 2nd Row - Executive - LH - Remove And Replace: Installation

  1. Position the rear of the cushion so that the seat belt buckles fit properly into the cutouts in the cushion.
  2. Press down firmly on the cushion in the areas above the grommet towers.
  3. Use Toolbox to run the Occupant Classification Re-Zero test.
scientia non olet · About LEMON Manuals