Light - Fog/Reverse - Rear - LH - Remove And Replace: Removal
- Remove the liftgate applique Applique - Liftgate (Remove And Replace) .
- Remove the tailgate lower finisher Finisher - Liftgate - Rear Window - Lower (Remove And Replace) .
- Release the watershield for access to the fog/reverse light.NOTE: A new watershield might be required if the adhesive is unable to secure it in position during reinstallation.
- Disconnect the fog/reverse light connector.
- Remove the nuts (x4) that attach the light assembly to the tailgate panel (torque 4 N.m).
- Remove the fog/reverse light assembly.