LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2012 >> Model S >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Doors, Windows And Latches -- Model S >> Latches, Strikers, And Pinch Sensors >> Exterior Release Switch - Liftgate - Remove And Replace >> Removal

Exterior Release Switch - Liftgate - Remove And Replace: Removal

  1. Open the liftgate to a suitable working height.
  2. Remove the applique from the liftgate Applique - Liftgate (Remove And Replace) .
    CAUTION: Take care not to damage component(s).
    CAUTION: Protect paintwork from possible damage during this procedure.
  3. Remove the bolts (x2) that secure the switch housing to the liftgate (torque 3 N.m/2.21 ft-lbs.).
    CAUTION: Replace all patchbolt(s).
    G14975092Courtesy of TESLA, INC.
  4. Release the switch and housing from the liftgate, then rotate and disconnect the harness connector.
    G14975093Courtesy of TESLA, INC.
  5. Remove the screws (x2) that secure the liftgate switch to the housing and remove the switch.
    G14975094Courtesy of TESLA, INC.
scientia non olet · About LEMON Manuals