Seal - Body - Side - Front - Primary - LH - Remove And Replace: Removal
- Remove the 'B' post upper trim B-Pillar Trim Panel - LH (Remove And Replace) .
- Release the clips (x3) that secure the leading edge of the seal to the body.CAUTION: Take care not to damage component(s).CAUTION: Protect exterior paint surfaces during this procedure.NOTE: Components have been removed in this graphic to aid clarity.
- Release the clips (x2) that secure the upper trailing edge of the seal to the body.
- Carefully release the seal from the rocker panel and work towards the upper section of the seal.
- Release the remaining seal from the brightwork.
- Remove the seal.