Rear Brake Shoe Removal and Installation: Removal

Remove brake drum referring to REAR BRAKE DRUM REMOVAL AND INSTALLATION .
Push and rotate 90° hold down pin (1) and remove hold down pin (1) and hold down spring (2).

Fig 1: Removing Hold Down Pin
Courtesy of SUZUKI OF AMERICA CORP.
Remove return springs, brake shoes and adjuster.
Disconnect parking brake shoe lever (1) from parking brake cable (2).

Fig 2: Disconnecting Parking Brake Shoe Lever From Parking Brake Cable
Courtesy of SUZUKI OF AMERICA CORP.
Remove push nut (1).
Remove parking brake shoe lever (2) from shoe rim (3).

Fig 3: Removing Parking Brake Shoe Lever From Shoe Rim
Courtesy of SUZUKI OF AMERICA CORP.