LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> SX4 SportBack, Standard Trans >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Rear Drum Brakes >> Repair Instructions >> Wheel Cylinder Removal and Installation >> Removal

Wheel Cylinder Removal and Installation: Removal

  1. Remove brake drum referring to REAR BRAKE DRUM REMOVAL AND INSTALLATION .
  2. Remove brake shoe referring to REAR BRAKE SHOE REMOVAL AND INSTALLATION .
  3. Loosen brake pipe flare nut (1) but only within the extent that fluid does not leak.
  4. Remove wheel cylinder mounting bolts (3). Disconnect brake pipe from wheel cylinder and put bleeder plug cap (2) onto pipe to prevent fluid from spilling.
    Fig 1: Identifying Wheel Cylinder Mounting Bolts
    G06868505Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals