Drum brake
- Remove console box. Refer to CONSOLE BOX COMPONENTS
- Loosen adjusting nut (2) until parking brake cable tension is no.
- Start engine and depress brake pedal more than 3 times with more than 150 N (15.3 kgf, 33.7 lbf) so as to obtain proper drum-to-shoe clearance.
- Stop engine and adjust parking brake lever stroke to specified value with adjusting nut (2).NOTE: Parking brake lever (1) must be released while adjusting.
Parking brake lever stroke
When lever is pulled up at 200 N (20.4 kgf, 45.0 lbf): 4 to 9 notches
- After completion of adjustment, make sure that brake drum is not dragging.