LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> SX4 Crossover, Standard Trans >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Rear Disc Brakes >> Repair Instructions >> Rear Disc Brake Pad Removal and Installation >> Removal

Rear Disc Brake Pad Removal and Installation: Removal

  1. Hoist vehicle and remove wheel.
  2. Release parking brake lever.
  3. Remove caliper pin bolts (1).
  4. Remove caliper (2) from caliper carrier.
    NOTE: If the removed brake caliper (2) is left hung by the brake hose, the brake hose may be damaged due to the tension caused by the caliper's weight. Hang a removed brake caliper with a wire hook or the like to relieve the brake hose of the tension.
    Fig 1: Identifying Caliper Pin Bolts
    G06868510Courtesy of SUZUKI OF AMERICA CORP.
  5. Remove brake pads and pad springs.
scientia non olet · About LEMON Manuals